Surfacing-thicknessing machine for the demanding craftsmen and carpentries, for a high-flexible production with an “elite” finishing.
ADVANTAGES
Perfect finishing
The planer unit stands on cast iron supports and the standard version has a 87 mm diameter cutter block with 3 knives. (The optional “Tersa” cutter block is available with 4 quick tightening knives and automatic adjustment). For an impeccable finish, the pressureof the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant work piece feed, while the outfeed roller, in sandblasted steel, maintains the perfect post-processing finishing.
Planing fence
The fs 41e uses a dedicated planing fence extremely rigid and smooth, thanks to a support with central round bar.
“Xilent” spiralknife cutter block with 3 series of knives
The 3 spiralknives give an exceptional finish. Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.
Cutterhead working width mm 410
Cutterblock diameter / no° of standard knives mm / n° 87 / 3
Dimension of standard knives mm 410 x 30 x 3
Max. stock removal mm 5
Jointer table length mm 2200
Planer table dimensions mm 410 x 775
Planer feed speeds m/min 6 / 12
Min. - max. planer working height mm 3 - 230
Single-phase motor Hp 4.8
Fence tilt degrees 0 - 45
